BENSHAW ENHANCED KEYPAD Informations techniques télécharger pdf (Page 113)

7 – TROUBLESHOOTING

107

The MX found the non-volatile parameter values to be corrupted.

Typically occurs when the MX is re-flashed with new software.

Perform a Factory Parameter reset and then properly set all parameters

before resuming normal operation.

F95 CPU Error – Parameter

EEPROM Checksum

Fault

If fault persists after performing a Factory Parameter reset, consult

factory.

F96 CPU Error The MX has detected an internal CPU problem. Consult factory.

F97 CPU Error – SW

Watchdog Fault

The MX has detected an internal software problem. Consult factory.

F98 CPU Error The MX has detected an internal CPU problem. Consult factory.

The non-volatile program memory has been corrupted. F99 CPU Error – Program

EPROM Checksum Fault

Consult factory. Control software must be reloaded in to the MX control

card before normal operation can resume.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 173 174

Pas de commentaire

BENSHAW ENHANCED KEYPAD Informations techniques Page 113